Reduce interfacial tension between water/oil, water/solid, water/air, and other contacting surfaces. Improve air or gas drilling through water-bearing formations with chemical offerings that serve as surfactants. Control filtration and stabilize temperatures. Help modify the relationship between the viscosity and percentage of solids in drilling fluids.

Increase the viscosity of water-based drilling fluids to enhance hole cleaning. Improve the hole-cleaning and solids-suspension capability of drilling fluids.

• Xanthan Gum
• Carboxymethyl Cellulose (CMC)
• Sodium Acid Pyrophosphate (SAPP)

Counteract the formation of foam, which can negatively impact the production process as a result of liquid carryover.

• Aluminum Stearate
• Polyethylene Glycol

Reduce the coefficient of friction to minimize torque and drag while drilling. It may also have functions of transmitting forces and transports foreign particles.

Control formation pressures, prevent formation caving, and facilitate the pulling of dry pipe.

• Calcium Carbonate (CaCO3)
• Barite (BaSO4)
• Hematite (Fe2O3)

Loss Circulation occurs when drilling fluid flows into geological formations instead of returning up annulus. LCM seal costly loss zones and preserve operational integrity. LCM products are both organic and synthetic.

• Walnut Shell
• Peanut Shell
• Coconut Shell
• Synthetic Graphite

Free pipe with spotting or soaking agents for all types of drilling fluids. Spotting fluids are water dispersible low toxicity, designed to free differentially stuck drill strings. They do not contain any harmful hydrocarbon additives.

• Weighted
• Non Weighted

A workover fluid is a fluid which is placed against the producing interval to control the formation pressure during work over operations such as Well killing, perforation, sand washing, water shut off, plug placing, packer job, gravel pack job and installation of artificial lift system.

• Ammonium Chloride (NH4Cl)
• Calcium Bromide (CaBr2)
• Calcium Chloride (CaCl2)
• Sodium Bromide (NaBr)
• Sodium Chloride (NaCl)
• Potassium Chloride (KCl)
• Potassium Carbonate (K2CO3)
• Potassium Sulphate (K2SO4)
• Potassium Acetate (CH3COOK)

Adjust and regulate the degree of acidity or alkalinity of drilling fluids.

• Soda Ash (Na2CO3)
• Sodium Bicarbonate (NaHCO3)
• Caustic Soda (NaOH)
• Hydrated Lime (Ca(OH)2)
• Magnesium Hydroxide (MgO)
• Potassium Hydroxide (KOH)
• Citric Acid (C6H8O7)

Mitigate corrosion, neutralize hazardous acid gas, and prevent the formation of production impairing scale. Prevent bacterial degradation and reduce the souring of drilling mud.

CORROSION INHIBITORS:
• Sodium Silicate (Na2SiO3)
• Potassium Silicate (K2SiO3)

BACTERICIDES:
• Glutaraldehyde
• Isothiazoline

SCAVENGERS:
• Ammonium Bisulphite (NH4HSO3)
• Sodium Sulphite (Na2SO3)
• Zinc Oxide (ZnO)

The act or means of controlling (usually lowering) the volume of filtrate that passes through a filter medium. Control of fluid loss for a mud is achieved by several means, one of which is by addition of fluid-loss-control materials to the mud system.

• Gilsonite

Widely used on Midstream and Upstream

• Pour Point Depressant
• Demulsifiers
• Corrosion Inhibitors and Biocides
• H2S Scavengers
• Anti Scaling Agent
• Antifoaming Agent
• Water Clarifier
• Processing Catalysts